What's new

Updates of this site are listed below.

---

2024

December 3

• "FANUC News 2024-II (December 2024) " was added in "FANUC News" of "About FANUC" menu.

December 2

• "ESG Data Book" was updated in "ESG Data Book" in "Sustainability" menu.
• "ESTIC CORPORATION" was added in "Introduction of Compatible Peripheral Devices for Plugin (Grippers, Tools and Carried Sensors)" in "Functions" of "ROBOT" in "Products" menu.

November 21

• "Receipt of the Special Investigation Committee Report and Our Actions Going Forward" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

November 13

• "Introduction to FANUC" was updated in " FANUC's Corporate Profile Booklet" of "Profile" menu.

November 11

• "Q&A Summary of the Telephone Conference on Financial Results for the Second Quarter ended September 30, 2024 (October 25, 2024)" was added in "Financial Announcements" of "Investors" menu.

November 6

• "Notice of the Status of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

November 5

• "FANUC Smart Digital Twin" was updated in "CNC" of "FA" in "Products" menu.
• Following Products were added in "New Products" of "Products" menu.
  • ROBOT New product: Large Handling Robot M-1000/550F-46A
  • ROBOT New product: New lightweight Teach Pendant
• "Models" was added in "Robot" of "Products" menu.
  • FANUC Robot M-950/500F-28A
  • FANUC Robot M-1000/550F-46A
• Following product brochures were added in "Product Brochures" in "Products" menu.
  • FANUC Robot GENERAL CATALOG (English, Chinese)

October 31

• "AI Servo Monitor" was updated in "IoT" in "Products" menu.
• Following product brochures were added in "Product Brochures" in "Products" menu.
  • FANUC Smart Digital Twin (English, Chinese)

October 28

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC Series 0i-MODEL F Plus (English, Chinese)
  • FANUC Series 30i/31i-LB Plus / Series 0i-LF Plus (English, Chinese)
  • FANUC Power Motion i-MODEL A Plus (English, Chinese)
  • FANUC Digital Servo Adapter-MODEL B (English, Chinese)
  • FANUC Positioner (English, Chinese)
  • FANUC Robot R-50iA / R-50iA Mate Controller (English, Chinese)

October 25

• Followings were added in "Financial Results and Conference Materials" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Consolidated Interim Financial Results For the six months ended September 30, 2024
  • Financial Results for the six months Ended September 30, 2024 (Reference Material)
• "Notice Concerning Distribution of Dividends of Surplus to Shareholders" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

October 22

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL α-DiB5 Plus series Standard version/Advanced version (English)
  • FANUC ROBODRILL α-DiB Plus series Standard version/Advanced version (English, Chinese)
  • FANUC Robot CRX series (English, Chinese)
  • FANUC Robot CRX-10iA/L Paint (English, Chinese)

October 16

• Special Site for Japan International Machine Tool Fair (JIMTOF2024) was launched.

October 4

• "Models" was added in "Robot" of "Products" menu.
  • FANUC Robot CRX-10iA/L Paint

October 3

• Document Number A-45384_00034 was added in "Standards-related Information" in "Products" menu.

October 2

• "Notice of the Status of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

September 27

• "AI Thermal Displacement Compensation Received “Japan Society for Precision Engineering Technology Award 2024"" was added in "News Release" of "About FANUC" menu.

September 26

• "Corporate Governance Guidelines" was revised in "Governance" in "Sustainability menu".

September 25

• "Health and Productivity Management" was updated in "Social" in "Sustainability" menu.

September 24

• "ORIENTAL MOTOR CO., LTD." was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

September 12

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL DDR-HSiB (English)
  • FANUC ROBOCUT α-CiC series (English, Chinese)

September 4

• "Notice of the Status of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

September 3

• Document Number A-96514 was updated in "Standards-related Information" in "Products" menu.

September 2

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC Robot CR (English, Chinese)

August 27

• "Notice of Resuming Shipments of ROBOCUT Products (FANUC’s wire electrical discharge machine)" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

August 9

• "Notice Regarding Completion of Payment for Disposal of Treasury Stock as Restricted Stock Remuneration" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

August 7

• "TAKEUCHI INDUSTRY CO.,LTD." was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

August 6

• "Q&A Summary of the Telephone Conference on Financial Results for the First Quarter ended June 30, 2024 (July 29, 2024) " was added in "Financial Announcements" of "Investors" menu.

July 29

• Followings were added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Notice of Resuming Shipments of ROBOCUT Products (FANUC’s wire electrical discharge machine)
• Followings were added in "Financial Results and Conference Materials" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Consolidated Quarterly Financial Results For the three months ended June 30, 2024
  • Financial Results for the three months Ended June 30, 2024 (Reference Material)

July 18

• "Notice Regarding Disposal of Treasury Stock as Restricted Stock Remuneration" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

July 12

• "FANUC America Completion of New Campus -Part of Strategic Investment Plan in North America totaling $250 Million-" was added in "News Release" of "About FANUC" menu.

July 8

• "Corporate Governance Report" was updated in "Library" of "Information for Shareholders and Investors" menu.

July 2

• "Greenhouse Gas Emissions / Environmental Performance Data(Water) Verification Report" was updated in "ESG Data Book" in "Sustainability" menu.

June 27

• " Resolutions of the 55th Ordinary General Meeting of Shareholders" was added in "Shareholder's Meeting" of "Information for Shareholders and Investors" menu.
• "Communication with Shareholders and Investors" was added in "Governance" in "Sustainability" menu.

June 21

• "Introduction to FANUC" was updated to the edition of June 2024 in FANUC's Corporate Profile Booklet of "Profile" menu.

June 11

• "Product Videos" in "Products" menu was updated.

June 7

• "Isel USA Inc" was added in "Introduction of Compatible Peripheral Devices for Plugin (Pedestals, Carts)" in "Functions" of "ROBOT" in "Products" menu.

June 4

• Following Products were added in "New Products" of "Products" menu.
  • FA New product: LASER SCANNER LS3Di-A
  • ROBOMACHINE New product: FANUC ROBOSHOT α-S15iB
  • ROBOMACHINE New product: FANUC ROBOCUT α-C800iC

May 30

• Followings were added in "Shareholder's Meeting" of "Investors" menu.
  • Notice of Convocation of The 55th Ordinary General Meeting of Shareholders
  • Supplementary Materials to the Notice of Convocation of The 55th Ordinary General Meeting of Shareholders

May 27

• "qbRobotics" was added in "Introduction of Compatible Peripheral Devices for Plugin (Grippers, Tools and Carried Sensors)" in "Functions" of "ROBOT" in "Products" menu.

May 23

• "FANUC News 2024-I (May 2024) " was added in "FANUC News" of "About FANUC" menu.

May 20

• "ROBOGUIDE" was updated in "Functions" of "ROBOT" in "Products" menu.

May 14

• Following Products were added in "New Products" of "Products" menu.
  • ROBOT New product: New Palletizing Robot M-410/800F-32C
  • ROBOT New product: Modular RTUs

May 13

• "Q&A Summary of the Telephone Conference on the Financial Results for the Year ended March 31, 2024 (April 24, 2024) " was added in "Financial Announcements" of "Investors" menu.
• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC Series 0i-MODEL F Plus (English, Chinese)
  • FANUC Series 30i / 31i / 32i-MODEL B Plus (English, Chinese)
  • FANUC Robot GENERAL CATALOG (English, Chinese)
  • FANUC Robot CRX series (English, Chinese)
  • FANUC Robot CR (English, Chinese)
  • FANUC Robot LR Mate (English, Chinese)
  • FANUC Robot M-10, M-20 (English, Chinese)
  • FANUC Robot M-410 (English, Chinese)
  • FANUC Robot M-710 (English, Chinese)
  • FANUC Robot M-800 (English, Chinese)
  • FANUC Robot M-900/M-910 (English, Chinese)
  • FANUC Robot M-2000 (English, Chinese)
  • FANUC Robot R-1000 (English, Chinese)
  • FANUC Robot R-2000 (English, Chinese)
  • FANUC Robot DR series (English, Chinese)
  • FANUC Robot ARC Mate (English, Chinese)
  • FANUC ROBOGUIDE (English, Chinese)

May 10

• "Notice of the Appointment of a Member of the Special Investigation Committee" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

May 9

• "Notice of the Status and the Conclusion of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

May 7

• Following Products were added in "New Products" of "Products" menu.
  • ROBOT New product: The World's First Global Explosion Proof Collaborative Paint Robot CRX-10iA/L Paint

April 24

• Followings were added in "Financial Results and Conference Materials" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Consolidated Annual Financial Results For the Year ended March 31, 2024
  • Financial Results for the year Ended March, 2024 (Reference Material)
• Followings were added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Notice of the Possibility of FANUC ROBOCUT for Europe being Subject to Tests which were Non-Compliant with EMC Harmonized Standards and Establishment of a Special Investigation Committee
  • Notice of Share Buyback
  • Notice Concerning the Cancellation of Treasury Shares
  • Notice Concerning Distribution of Dividends from Surplus to Shareholders

April 3

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FIELD system Basic Package (English)
  • FANUC ROBODRILL α-DiB5 Plus series Standard version/Advanced version (English)
  • FANUC ROBODRILL α-DiB Plus series Standard version/Advanced version (English)
  • FANUC ROBOCUT α-CiC series (English, Chinese)

March 18

• "News Reports on FANUC’s Transfer Pricing" was added in "News Release" of "About FANUC" menu.

March 7

• "FANUC DDRiB / DDR-TiB / DDR-HSiB" was updated in "ROBODRILL" of "ROBOMACHINE" in "Products" menu.

March 6

• "FANUC Honored as a Clarivate Top 100 Global Innovator 2024" was added in "News Release" of "About FANUC" menu.

March 5

• "Notice of the Status of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

February 27

• "FANUC News 2023-III (February 2024) " was added in "FANUC News" of "About FANUC" menu.

February 21

• "FANUC Iberia Office Expansion in Spain – Strengthening FANUC’s Business in Europe" was added in "News Release" of "About FANUC" menu.

February 16

• "DH-Robotics" was added in "Introduction of Compatible Peripheral Devices for Plugin (Grippers, Tools and Carried Sensors)" in "Functions" of "ROBOT" in "Products" menu.

February 8

• "Q&A Summary of the Telephone Conference on Financial Results for the Second Quarter ended December 31, 2023 (January 26, 2024) " was added in "Financial Announcements" of "Investors" menu.

February 6

• "FANUC recognized as the highest rated "A-List Company" on CDP "Climate Change"." was added in "News Release" of "About FANUC" menu.

February 5

• "Code of Conduct" was in "Sustainability" menu was revised.

January 30

• "Corporate Governance Report" was updated in "Library" of "Information for Shareholders and Investors" menu.

January 29

• Following Products were added in "New Products" of "Products" menu.
  • ROBOT New product: Robot Controller R-50iA
  • ROBOT New product: New Robot M-950 with a Payload Capacity of 500kg
  • ROBOT New product: New Medium Payload Handling Robot M-710 with a Payload Capacity of 70kg

January 26

• Followings were added in "Financial Results and Conference Materials" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Consolidated Quarterly Financial Results For the nine months ended December 31, 2023
  • Financial Results for the nine months Ended December 31, 2023 (Reference Material)

January 17

• Followings were added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.
• Kobe Kizai Co., Ltd.
• Takenouchi Industrial Textile Corp.

January 11

• "Aid to Those Affected by the 2024 Noto Peninsula Earthquake" was added in "News Release" of "About FANUC" menu.

January 10

• "Corporate Governance Report" was updated in "Library" of "Information for Shareholders and Investors" menu.
• "FANUC News 2023 Roundtable Discussion Special Issue (January 2024) " was added in "FANUC News" of "About FANUC" menu.

2023

December 28

• "SUSTAINABILITY REPORT 2023" was added in "Sustainability Report" of "Sustainability" menu.

December 20

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL DDR-TiB (English)
  • FANUC ROBODRILL DDR-HSiB (English)

December 7

• "Notice of the Status of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

December 5

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC ROBOCUT α-CiC series (English, Chinese)

November 29

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • Robot i series (English, Chinese)
  • FANUC R-50iA / R-50iA Mate Controller (English)
  • FANUC Robot CRX series (English, Chinese)
  • FANUC Robot CR-35iB (English, Chinese)
  • FANUC Robot M-710iD (English, Chinese)
  • FANUC Robot M-950iA (English, Chinese)
  • FANUC Robot Vision and Force Control (English, Chinese)
  • FANUC ROBOGUIDE (English, Chinese)
  • FANUC ZDT (English, Chinese)

November 27

• "80/20 Inc." was added in "Introduction of Compatible Peripheral Devices for Plugin (Pedestals, Carts)" in "Functions" of "ROBOT" in "Products" menu.
• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC ROBOSHOT α-SiB series (English, Chinese)

November 21

• Document Number A-96514 was updated in "Standards-related Information" in "Products" menu.
• "Integrated Report 2023" was added in "Integrated Reports" of "Investors" menu.
• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL Robot Package (English)

November 13

• "Q&A Summary of the Telephone Conference on Financial Results for the Second Quarter ended September 30, 2023 (October 31, 2023) " was added in "Financial Announcements" of "Investors" menu.

November 7

• "Third Dimension Software Ltd." was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

October 31

• Followings were added in "Financial Results and Conference Materials" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Consolidated Quarterly Financial Results For the six months ended September 30, 2023
  • Financial Results for the six months Ended September 30, 2023 (Reference Material)
• Followings were added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Notice Concerning Distribution of Dividends of Surplus to Shareholders
  • Notice of Share Buyback

October 27

• "Notice of the Status and Conclusion of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

October 10

• Japanese/Chinese version of "Introduction to FANUC" (October 2023) was added in FANUC's Corporate Profile Booklet of "Profile" menu.
• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC Slice I/O (English, Chinese)
  • FANUC ROBODRILL α-DiB5 Plus series Standard version/Advanced version (English)
  • FANUC ROBODRILL α-DiB Plus series Standard version/Advanced version (English, Chinese)
  • FANUC ROBOSHOT α-SiB series (English, Chinese)

October 6

• "Digital Twin of FANUC CNC Received 'Japan Society for Precision Engineering Technology Award 2023'" was added in "News Release" of "About FANUC" menu.

October 4

• "Notice of the Status of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

September 19

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC ROBOCUT α-CiC series (English, Chinese)
  　　

September 15

• "Total Shipment of 1 Million Units of FANUC Robot" was added in "News Release" of "About FANUC" menu.

September 11

• "STÄUBLI" was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

September 8

• "BL AUTOTEC, LTD." was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

August 25

• "Notice Regarding Completion of Payment for Disposal of Treasury Stock as Restricted Stock Remuneration" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
• "Health and Productivity Management" was updated in "Social" in "Sustainability" menu.

August 23

• "Tocho Marking Systems America, Inc." was added in "Introduction of Compatible Peripheral Devices for Plugin (Grippers, Tools and Carried Sensors)" in "Functions" of "ROBOT" in "Products" menu.

August 18

• "EWELLIX" was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

August 9

• "Q&A Summary of the Telephone Conference on Financial Results for the First Quarter ended June 30, 2023 (July 28, 2023) " was added in "Financial Announcements" of "Investors" menu.

August 1

• Following Products were added in "New Products" of "Products" menu.
  • FA New function: Improved power consumption monitor
  • FA New function: Supporting the displaying of spindle motor characteristics charts
  • ROBOT New product: FANUC Robot SR-3iA/U
  • ROBOT New function: Easy force control using the Collaborative Robot CRX

July 28

• "Notice Regarding Disposal of Treasury Stock as Restricted Stock Remuneration" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
• Followings were added in "Financial Results and Conference Materials" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Consolidated Quarterly Financial Results For the three months ended June 30, 2023
  • Financial Results for the three months Ended June 30, 2023 (Reference Material)

July 27

• "FANUC News 2023-I (July 2023)" was added in "FANUC News" of "About FANUC" menu.
• Followings were published or updated in "Sustainability menu".
  • "Greenhouse Gas Emissions / Environmental Performance Data Verification Report" was updated.
  • "Environmental Performance Data (Water) Verification Report" was updated.
  • "Climate Change" was updated in "Environment".
  • "Disclosure in Accordance with TCFD Recommendations" was updated in "Environment".

July 26

• "Product Videos" in "Products" menu was updated.

July 24

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL α-DiB5 Plus series (English)
  • FANUC ROBODRILL α-DiB Plus series (English, Chinese)
  • FANUC ROBODRILL α-DiB5_ADV Plus series Advanced version (English)
  • FANUC ROBODRILL α-DiB_ADV Plus series Advanced version (English, Chinese)

July 10

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC ROBOSHOT α-SiA series (English, Chinese)

July 7

• "Corporate Governance Report" was updated in "Library" of "Information for Shareholders and Investors" menu.

July 6

• "Vulnerability Disclosure Policy" was added in "Product Security" in "Products" menu.

July 4

• Following Products were added in "New Products" of "Products" menu.
  • FA New Product: CNC Reflection Studio

June 29

• " Resolutions of the 54th Ordinary General Meeting of Shareholders" was added in "Shareholder's Meeting" of "Information for Shareholders and Investors" menu.
• "Change of a Representative Director" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC Series 0i-MODEL F
  • FANUC Series 0i-MODEL F Plus
  • FANUC Series 30i / 31i / 32i / 35i-MODEL B
  • FANUC Series 30i / 31i / 32i-MODEL B Plus
  • FANUC Series 30i/31i-LB Plus / Series 0i-LF Plus
  • FANUC iPC FIP1000 series
  • FANUC Power Motion i-MODEL A
  • FANUC Digital Servo Adapter-MODEL B
  • FANUC αi-B series SERVO / βi-B series SERVO
  • FANUC DD MOTOR DiS-B series
  • FANUC LINEAR MOTOR LiS-B series
  • FANUC BUILT-IN SPINDLE MOTOR Bi-B series
  • FANUC LASER C series

June 22

• Following Product was added in "New Products" of "Products" menu.
  • FA New Product: FANUC Slice I/O

June 12

• Following Products were added in "New Products" of "Products" menu.
  • ROBOSHOT New Product: FANUC ROBOSHOT α-S30iB, α-S250iB, α-S300iB, α-S450iB
  • New function of ROBOSHOT: Maintenance inspection support function

June 7

• Following Product was added in "New Products" of "Products" menu.
  • New function of ROBOCUT: Improved cutting accuracy of nozzle open condition

June 1

• Followings were added in "Shareholder's Meeting" of "Investors" menu.
  • Notice of Convocation of The 54th Ordinary General Meeting of Shareholders
  • Supplementary Materials to the Notice of Convocation of The 54th Ordinary General Meeting of Shareholders

May 31

• "HACARUS INC." was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

May 24

• Following product brochures were updated and added in "Product Brochures" in "Products" menu.
  • FANUC Power Motion i-MODEL A Plus (English, Chinese)

May 18

• Following product brochures were updated and added in "Product Brochures" in "Products" menu.
  • FANUC αi-D series SERVO (English, Chinese)

May 17

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • Robot i series (English, Chinese)
  • FANUC Robot CRX series (English, Chinese)
• "Models" was updated in "Robot" of "Products" menu.
  • FANUC Robot CRX series

May 15

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC Robot M-1iA, 2iA, 3iA, DR-3iB (English, Chinese)
  • FANUC Robot M-10iD, 20iD (English, Chinese)
• "IoT" was updated in "Products" menu.

May 12

• "Q&A Summary of the Telephone Conference on the Financial Results for the Year ended March 31, 2023 (April 26, 2023)" was added in "Financial Announcements" of "Investors" menu.

April 26

• Followings were added in "Financial Results and Conference Materials" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Consolidated Annual Financial Results For the Year ended March 31, 2023
  • Financial Results for the year Ended March, 2023 (Reference Material)
• Followings were added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Notice Concerning Distribution of Dividends from Surplus to Shareholders
  • Notice Concerning the Cancellation of Treasury Shares
  • Personnel Matter regarding the Member of the Board of Directors

April 21

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC ROBOSHOT α-SiB series (English, Chinese)

April 13

• "ANUBIS 3D" was added in "Introduction of Compatible Peripheral Devices for Plugin (Grippers, Tools and Carried Sensors)" in "Functions" of "ROBOT" in "Products" menu.
• "Vulnerabilities in ROBOGUIDE" (PDF file) was added in "Vulnerability Information" in "Products" menu.

March 31

• "Notice of the Status and the Conclusion of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

March 30

• "GRIP GmbH" was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.
• "Notice of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

March 29

• "FANUC News 2022-IV (March 2023)" was added in "FANUC News" of "About FANUC" menu.

March 15

• "Security Guidelines for Use of FANUC Products" was added in "Product Security" in "Products" menu.

March 2

• "Corporate Governance Report" was updated in "Library" of "Information for Shareholders and Investors" menu.

February 17

• "Aid to Those Affected by the Earthquakes in South-East Turkey" was added in "News Release" of "About FANUC" menu.
• "FANUC Selected as a Clarivate Top 100 Global Innovator 2023" was added in "News Release" of "About FANUC" menu.

February 13

• "FerRobotics" was added in "Introduction of Compatible Peripheral Devices for Plugin (Grippers, Tools and Carried Sensors)" in "Functions" of "ROBOT" in "Products" menu.

February 8

• "Q&A Summary of the Telephone Conference on Financial Results for the Second Quarter ended December 31, 2022 (January 27, 2023)" was added in "Financial Announcements" of "Investors" menu.

February 3

• "Notice of the Status of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

January 27

• Followings were added in "Financial Results and Conference Materials" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Consolidated Quarterly Financial Results For the nine months ended December 31, 2022
  • Financial Results for the nine months Ended December 31, 2022 (Reference Material)
• Followings were added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

  • Notice Concerning Stock Split and Partial Amendment to the Articles of Incorporation

January 25

• "FANUC News 2022-III (January 2023)" was added in "FANUC News" of "About FANUC" menu.

January 18

• "Materiality" was updated in "General" in "Sustainability" menu.

2022

December 26

• "SUSTAINABILITY REPORT 2022" was added in "Sustainability Report" of "Sustainability" menu.
• "Integrated Report 2022" was added in "Integrated Reports" of "Investors" menu.

December 16

• "FANUC News 2022 Roundtable Discussion Special Issue (December 2022) " was added in "FANUC News" of "About FANUC" menu.

December 7

• Following product brochures were updated and added in "Product Brochures" in "Products" menu.
  • FANUC Series 30i/31i-LB Plus / Series 0i-LF Plus (English, Chinese)
  • FANUC iPC FIP1000 series (English, Chinese)

December 5

• "Notice of the Status of Share Buyback" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

December 1

• "FIELD system Basic Package" was added in "FIELD system" of "Products" menu.

November 29

• Japanese/Chinese version of "Introduction to FANUC" (November 2022) was added in FANUC's Corporate Profile Booklet of "Profile" menu.

November 24

• "TripleA robotics ApS" was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

November 11

• Following product brochure was updated in "Product Brochures" in "Products" menu.
  • FANUC LASER C Series (English, Chinese)

November 10

• Document Number A-96535 was updated in "Standards-related Information" in "Products" menu.

November 9

• Following product brochure was updated in "Product Brochures" in "Products" menu.
  • FANUC Robot M-900iB (English, Chinese)

November 7

• "Q&A Summary of the Telephone Conference on Financial Results for the Second Quarter ended September 30, 2022 (October 27, 2022)" was added in "Financial Announcements" of "Investors" menu.
• Followings were updated in "CNC" of "FA" in "Products" menu.
  • New Function: CNC GUIDE 2
  • New Function: AI Thermal Displacement Compensation
  • New Function: Cutting Load Monitor Function
  • Digital Twin for FANUC CNC
• "SERVO VIEWER Surface Estimation" was updated in "Digital Twin for FANUC CNC" of "CNC" of "FA" in "Products" menu.
• "Internal Control System" was updated in "Governance" in "Sustainability" menu.

November 1

• Following product brochures were updated and added in "Product Brochures" in "Products" menu.
  • FANUC ZDT (English, Chinese)
  • FANUC Robot CRX series (English, Chinese)
  • FANUC Robot M-1000iA (English, Chinese)
  • FANUC Robot M-2000iA (English, Chinese)

October 27

• Followings were added in "Financial Results and Conference Materials" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Consolidated Quarterly Financial Results For the six months ended September 30, 2022
  • Financial Results for the six months Ended September 30, 2022 (Reference Material)
• Followings were added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Notice Concerning Distribution of Dividends of Surplus to Shareholders (for the six months ended September 30, 2022)

October 14

• "Vulnerabilities in ROBOGUIDE" (PDF file) was updated in "Vulnerability Information" in "Products" menu.

October 6

• Special Site for Japan International Machine Tool Fair (JIMTOF2022)
• Following product brochures were updated and added in "Product Brochures" in "Products" menu.
  • FANUC ROBOSHOT α-SiB series (English, Chinese)

September 16

• "FANUC News 2022-II (September 2022)" was added in "FANUC News" of "About FANUC" menu.

August 9

• "FANUC News 2022-I (August 2022)" was added in "FANUC News" of "About FANUC" menu.

August 8

• Followings were published or updated in "Sustainability menu".
  • "ESG DATA BOOK" was updated.
  • "Greenhouse Gas Emissions / Environmental Performance Data Verification Report" was updated.
  • "Disclosure in Accordance with TCFD Recommendations" was updated in "Environment" in "Sustainability menu".

August 5

• "Notice Regarding Completion of Payment for Disposal of Treasury Stock as Restricted Stock Remuneration" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

August 4

• "Q&A Summary of the Telephone Conference on Financial Results for the First Quarter ended June 30, 2022 (July 27, 2022)" was added in "Financial Announcements" of "Investors" menu.

August 3

• Video was updated in "IoT" in "Product Videos" in "Products" menu.

July 29

• "Please be careful of suspicious emails masquerading as emails from FANUC CORPORATION" was added in "News Release" of "About FANUC" menu.

July 27

• Followings were added in "Financial Results and Conference Materials" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Consolidated Quarterly Financial Results For the three months ended June 30, 2022
  • Financial Results for the three months Ended June 30, 2022 (Reference Material)

July 15

• "Vulnerabilities in ROBOGUIDE" (PDF file) was updated in "Vulnerability Information" in "Products" menu.

July 14

• " FANUC CORPORATION 53rd Ordinary General Meeting of Shareholders Explanation of Matter of High Interest of Shareholders" was added in "Shareholder's Meeting" of "Information for Shareholders and Investors" menu.

July 8

• " Notice Regarding Disposal of Treasury Stock as Restricted Stock Remuneration" was added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.

July 6

• "Corporate Governance Report" was added in "Library" of "Information for Shareholders and Investors" menu.

June 29

• "Resolutions of the 53rd Ordinary General Meeting of Shareholders" was added in "Shareholder's Meeting" of "Investors" menu.

June 9

• Followings were added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Notice of the Status of Share Buyback
• "SERVO-ROBOT" was added in "Introduction of Compatible Peripheral Devices for Plugin (Grippers, Tools and Carried Sensors)" in "Functions" of "ROBOT" in "Products" menu.

June 1

• Followings were added in "Shareholder's Meeting" of "Investors" menu.
  • Notice of Convocation of The 53rd Ordinary General Meeting of Shareholders
  • Supplementary Materials to the Notice of Convocation of The 53rd Ordinary General Meeting of Shareholders

May 31

• "Daiwa Adtech Co.,Ltd." was added in "Introduction of Compatible Peripheral Devices for Plugin (Pedestals, Carts)" in "Functions" of "ROBOT" in "Products" menu.

May 24

• Following product brochures were updated and added in "Product Brochures" in "Products" menu.
  • FANUC Robot M-1000iA (English, Chinese)
• "Mech-Mind Robotics Technologies Ltd." was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

May 16

• Following product brochures were updated and added in "Product Brochures" in "Products" menu.
  • FANUC Robot CRX series (English, Chinese)
  • FANUC Robot M-710iC (English, Chinese)

May 12

• Following product brochures were updated and added in "Product Brochures" in "Products" menu.
  • FANUC Series 0i-MODEL F Plus (English, Chinese)
  • FANUC Series 30i/31i/32i-MODEL B Plus (English, Chinese)
  • FANUC Robot i series (English, Chinese)
  • FANUC ROBOCUT α-CiC series (English, Chinese)
• "FANUC News 2021-Ⅲ (May 2022)" was added in "FANUC News" of "About FANUC" menu.

May 11

• "Q&A Summary of the Telephone Conference on the Financial Results for the Year Ended March 31, 2022 (April 26, 2022)" was added in "Financial Announcements" of "Investors" menu.

April 27

• "Vulnerabilities in ROBOGUIDE" (PDF file) was updated in "Vulnerability Information" in "Products" menu.

April 26

• Followings were added in "Financial Results and Conference Materials" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Consolidated Annual Financial Results For the Year ended March 31, 2022
  • Financial Results for the year Ended March, 2022 (Reference Material)
• Followings were added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Notice Concerning Distribution of Dividends from Surplus to Shareholders (for the six months ended March 31, 2022)
  • Notice Concerning the Partial Amendment to the Articles of Incorporation
  • Personnel Matter

April 25

• "Introduction to FANUC" was updated to the edition of April 2022 in FANUC's Corporate Profile Booklet of "Profile" menu.

April 20

• Following product brochures were added in "Product Brochures" in "Products" menu.
  • FANUC CNC GUIDE / CNC Simulator (English, Chinese)
  • FANUC ROBODRILL α-DiB5 Plus series (English)
  • FANUC ROBODRILL α-DiB Plus series (English, Chinese)
  • FANUC ROBODRILL α-DiB5_ADV Plus series (English)
  • FANUC ROBODRILL α-DiB_ADV Plus series (English, Chinese)
  • FANUC ROBODRILL-QSSR (English)
  • FANUC ROBODRILL-LINKi (English)

April 8

• "Vulnerabilities in ROBOGUIDE" (PDF file) was added in "Vulnerability Information" in "Products" menu.

April 1

• "ACCUFACTURE" was added in "Introduction of Compatible Peripheral Devices for Plugin (Pedestals, Carts)" in "Functions" of "ROBOT" in "Products" menu.
• "Privacy Policy" was updated.

March 31

• Followings were added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Notice of the Status and Conclusion of Share Buyback

March 24

• Followings were added in "Other Disclosures" in "Financial Announcements, etc." of "Information for Shareholders and Investors" menu.
  • Notice of Share Buyback
• "Murrplastik" was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

March 18

• "Vulnerabilities in FANUC Robot Controllers" (PDF file) was updated in "Vulnerability Information" in "Products" menu.

March 17

• "FANUC’s Support to Ukraine Regarding the Humanitarian Crisis" was added in "News Release" of "About FANUC" menu.
• "FANUC Reaches CNC Production Milestone of 5 Million" was added in "News Release" of "About FANUC" menu.

March 9

• "Models" was updated or added in "Robot" of "Products" menu.
  • FANUC Robot CRX series
  • FANUC Robot CR-35iB
  • FANUC Robot SR series
• Following product brochure was updated and added in "Product Brochures" in "Products" menu.
  • FANUC Robot i series (English, Chinese)
  • FANUC CR-15iA/35iB (English, Chinese)
  • FANUC Robot SR-3iA, SR-6iA, SR-12iA, SR-20iA (English, Chinese)
  • FANUC Robot LR-10iA (English, Chinese)
  • FANUC Robot M-1000iA (English, Chinese)

March 7

• "FANUC Awarded as a Clarivate Top 100 Global Innovator 2022" was added in "News Release" of "About FANUC" menu.

March 1

• Video was updated in "introduction of CRX series" in "ROBOT" in "Products" menu.
• "iREX 2022" in "Products" menu was updated.

February 28

• "FANUC News 2021-Ⅱ (February 2022)" was added in "FANUC News" of "About FANUC" menu.

February 17

• "Corporate Governance Report" was added in "Library" of "Information for Shareholders and Investors" menu.

February 15

• "Please be careful of suspicious emails masquerading as emails from FANUC CORPORATION" was added in "News Release" of "About FANUC" menu.

February 14

• Video was added to "introduction of CRX series" in "ROBOT" in "Products" menu.

February 10

• "About video content on the FANUC DXCE site" was added in "News Release" of "About FANUC" menu.

February 4

• "Q&A Summary of the Telephone Conference on Financial Results for the Third Quarter ended December 31, 2021 (January 26, 2022)" was added in "Financial Announcements" of "Investors" menu.

February 3

• "iREX 2022" in "Products" menu was updated.

February 1

• "New-Era Co., Ltd." was added in "Introduction of Compatible Peripheral Devices for Plugin (Grippers, Tools and Carried Sensors)" in "Functions" of "ROBOT" in "Products" menu.

January 31

• Following was added in "Vulnerability Information" in "Products" menu.
  • Impact of Apache Log4j Vulnerability(CVE-2021-44832) to FANUC Products
• Following product brochure was added in "Product Brochures" in "Products" menu.
  • FANUC Remote Laser Welding Robot System (English)

January 28

• "Models" was updated in "Robot" of "Products" menu.
  • FANUC Robot LR-10iA
  • FANUC Robot M-1000iA
  • FANUC Robot R-2000iC
  • Paint Robot

January 26

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Consolidated Quarterly Financial Results For the nine months ended December 31, 2021
  • Financial Results for the nine months Ended December 31, 2021 (Reference Material)
• "Disclosure in Accordance with TCFD Recommendations" was updated in "Environment" in "Sustainability menu".

January 25

• "GER4TECH Mechatronik GmbH" was added in "Introduction of Compatible Peripheral Devices for Plugin (Pedestals, Carts)" in "Functions" of "ROBOT" in "Products" menu.

2021

December 28

• "ANNUAL REPORT 2021" was added in "Annual Reports" of "Investors" menu.

December 24

• "Corporate Governance Guidelines" was revised in "Governance" in "Sustainability menu".

• Following product brochure was updated and added in "Product Brochures" in "Products" menu.
  • FANUC Robot R-2000iC (English, Chinese)
  • FANUC Robot R-2000iD (English, Chinese)
  • FANUC Robot P-250iB (English, Chinese)
  • FANUC Robot Vision and Force Control (English, Chinese)

December 17

• "Vulnerabilities in FANUC Robot Controllers" (PDF file) was added in "Vulnerability Information" in "Products" menu.

December 10

• "Basic Management Policies" was added in "Corporate Profile" in "About FANUC menu".

December 7

• "Sustainability Basic Policy" was added in "General" in "Sustainability menu".

December 2

• "OHM ELECTRIC CO., LTD." was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

November 29

• "ROBOTIQ" was added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.
• Followings were added in "CNC" of "FA" in "Products" menu.
  • "FANUC Series 30i/31i-LB Plus"
  • "FANUC Series 0i-LF Plus"

November 26

• "Introduction to FANUC" was updated to the edition of November 2021 in FANUC's Corporate Profile Booklet of "Profile" menu.

November 5

• "Q&A Summary of the Telephone Conference on Financial Results for the Second Quarter ended September 30, 2021 (October 27, 2021)" was added in "Financial Announcements" of "Investors" menu.
• Followings were published or updated in "Sustainability menu".
  • "SUSTAINABILITY REPORT 2021" was published in "Sustainability Report".
  • "ESG DATA BOOK" was updated.

October 27

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Consolidated Quarterly Financial Results For the six months ended September 30, 2021
  • Financial Results for the six months Ended September 30, 2021 (Reference Material)
  • Notice Concerning Distribution of Dividends of Surplus to Shareholders (for the six months ended September 30, 2021)

October 22

• "Greenhouse Gas Emissions / Environmental Performance Data Verification Report" was published.

October 18

• Following Product was added in "New Products" of "Products" menu.
  • New Function: QSSR ON-SITE

October 6

• Following product brochure was updated in "Product Brochures" in "Products" menu.
  • FANUC Robot CRX-10iA, 10iA/L (English, Chinese)
  • FANUC Robot ARC Mate 100iD / FANUC Robot ARC Mate 120iD (English, Chinese)
  • FANUC Robot M-10iD / FANUC Robot M-20iD (English, Chinese)

September 27

• "Notice Regarding Completion of Payment for Disposal of Treasury Stock as Restricted Stock Remuneration" was added in "Financial Announcements" of "Investors" menu.

September 15

• "JMC Motion" was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.

August 4

• "Q&A Summary of the Telephone Conference on Financial Results for the First Quarter ended June 30, 2021 (July 29, 2021)" was added in "Financial Announcements" of "Investors" menu.

August 2

• "FANUC DXCE site maintenance" was added in "News Release" of "About FANUC" menu.
• Following product brochure was updated in "Product Brochures" in "Products" menu.
  • FANUC DD MOTOR DiS-B series (English, Chinese)

July 29

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Consolidated Quarterly Financial Results For the three months ended June 30, 2021
  • Financial Results for the three months Ended June 30, 2021 (Reference Material)
  • Notice Concerning Revision of Financial Forecasts

July 27

• "3D Vision Sensor 3DV/70 and 3DV/200" was added in "iRVision " in "Functions" of "ROBOT" in "Products" menu.

July 21

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Notice Regarding Disposal of Treasury Stock as Restricted Stock Remuneration

July 16

• "IGUS" was added in "Introduction of Compatible Peripheral Devices for Plugin (Others)" in "Functions" of "ROBOT" in "Products" menu.
• Following Products were added in "New Products" of "Products" menu.
  • FA New product: FANUC Series 30i/31i-MODEL B Plus High-speed Model
  • FA New Function: Servo Learning Oscillation for breaking chips
  • FA New Function: QSSR AUTO PATH
  • ROBOT New Function: iRVision 3D Model Detection Function
  • ROBOMACHINE New Product: FANUC ROBOCUT α-CiC series
  • IoT New Function: FIELD system PMA-Monitor
  • IoT New Functions: FIELD system Solutions

July 12

• "FANUC News 2021-I (July 2021)" was added in "FANUC News" of "About FANUC" menu.

July 7

• "Corporate Governance Guidelines" was revised in "Governance" in "Sustainability menu".

July 1

• ""ROBOMACHINE 360° Around Movies" is updating on FANUC DXCE site for a limited time" was added in "News Release" of "About FANUC" menu.

June 25

• "FANUC ROBOSHOT α-SiB series" was added in "ROBOSHOT" of "ROBOMACHINE" in "Products" menu.

June 24

• "Resolutions of the 52nd Ordinary General Meeting of Shareholders" was added in "Shareholder's Meeting" of "Investors" menu.

June 14

• "FANUC News 2021 Special Edition (May 2021)" was added in "FANUC News" of "About FANUC" menu.

June 11

• "FANUC Robot TR-510iA" was added in "Palletizing Robot, Others" in "Models" of "ROBOT" in "Products" menu.

• Following product brochure was added or updated in "Product Brochures" in "Products" menu.
  • FANUC Robot TR-510iA (English, Chinese)
  • FANUC Robot P-1000iA (English, Chinese)
  • FANUC ROBODRILL-QSSR (English)

June 7

• "Force Control Function" was added in "Functions" of "ROBOT" in "Products" menu.

May 31

• Following product brochure was updated in "Product Brochures" in "Products" menu.
  • Robot i series (English, Chinese)
  • FANUC Robot M-20iB (English, Chinese)

May 27

• Followings were added in "Shareholder's Meeting" of "Investors" menu.
  • Notice of Convocation of The 52nd Ordinary General Meeting of Shareholders
  • Supplementary Materials to the Notice of Convocation of The 52nd Ordinary General Meeting of Shareholders

May 25

• "Vention" was added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.

May 24

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Notice Regarding Introduction of Restricted Stock Remuneration System
  • [Disclosure Update]Partial Change to “Transition to a Company with Audit and Supervisory Committee and Amendments to Parts of the Articles of Incorporation”
• "WEISS ROBOTICS" was added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.

May 13

• "Product Videos" in "Products" menu was updated.

May 7

• "Q&A Summary of the Telephone Conference on the Financial Results for the Year Ended March 2021 (April 27, 2021)" was added in "Financial Announcements" of "Investors" menu.
• Following product brochure was added in "Product Brochures" in "Products" menu.
  • FANUC Series 30i/31i-LB Plus / Series 0i-LF Plus (English, Chinese)
  • FANUC ROBOCUT α-C800iB (English, Chinese)

April 27

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Consolidated Annual Financial Results For the Year ended March 31, 2021
  • Financial Results for the year Ended March, 2021 (Reference Material)
  • Notice Concerning Transition to a Company with Audit and Supervisory Committee and Amendments to Parts of the Articles of Incorporation
  • Personnel Matter
  • Notice Concerning Distribution of Dividends from Surplus to Shareholders
  • Notice of Share Buyback
  • Notice Concerning the Cancellation of Treasury Shares
• "SUSTAINABILITY REPORT 2020" was added in "Sustainability Report" of "Sustainability" menu.

April 16

• "FANUC ROBODRILL-LINKi" was added in "ROBODRILL" of "ROBOMACHINE" in "Products" menu.

April 12

• Following product brochure was added in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL-LINKi (English)

April 9

• "ATI Industrial Automation, Inc." was added in "Introduction of Compatible Peripheral Devices for Plugin (Grippers, Tools and Carried Sensors)" in "Functions" of "ROBOT" in "Products" menu.

April 7

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC Positioner (English, Chinese)
  • FANUC ROBOSHOT α-SiB series (English, Chinese)
  • FANUC ROBONANO α-NMiA (English, Chinese)

March 24

• "Sustainability" menu was added.

March 18

• "FANUC Robot M-800iA/60" was added in "ROBOT" in "Products" menu.

March 17

• "NABELL HOLDINGS Co. Ltd." was added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.

March 16

• "Introduction to FANUC" was updated to the edition of March 2021 in FANUC's Corporate Profile Booklet of "Profile" menu.

March 1

• "FANUC ROBOCUT α-CiC series" was introduced in "ROBOCUT" of "ROBOMACHINE" in "Products" menu.
• The product brochur "FANUC ROBOCUT α-CiC series (English)" was added in "Product Brochures" in "Products" menu.

February 16

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC Robot CRX-10iA, 10iA/L (English, Chinese)

February 12

• "KOSMEK LTD." was added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.

February 8

• Following Policies were added in "Governance" in "ESG-Related Information" of "Investors" menu.
  • Anti-Bribery Policy
  • Tax Policy

February 2

• "Q&A Summary of the 2020 Q3 Financial Results Conference (Teleconference) held on January 27, 2021" was added in "Financial Announcements" of "Investors" menu.
• "ANNUAL REPORT 2020" was added in "Annual Reports" of "Investors" menu.

February 1

• "CKD Corporation" was added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.

January 28

• "ANUBIS 3D" was added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.

January 27

• Following product brochures were added in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL α-DiB Plus series (Chinese)
  • FANUC ROBODRILL α-DiB_ADV Plus series (Chinese)
• Followings were added in "Financial Announcements" of "Investors" menu.
  • Consolidated Quarterly Financial Results (based on Japanese standards) For the nine months ended December 31, 2020
  • Financial Results for the nine months Ended December 31, 2020 (Reference Material)

January 19

• "FANUC iRVision/Force Sensor" was added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.

January 13

• Following product brochures were added in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL α-DiB Plus series (English)
  • FANUC ROBODRILL α-DiB_ADV Plus series (English)

January 7

• "ESG DATA BOOK" was updated to the version of December 23, 2020 in "ESG-Related Information" of "Investors" menu.

January 5

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC Robot SR-3iA, 6iA, 12iA, 20iA (English, Chinese)
  • FANUC Robot ARC Mate 100iD / FANUC Robot ARC Mate 120iD (English, Chinese)
  • FANUC Robot M-10iD / FANUC Robot M-20iD (English, Chinese)
  • FANUC Robot M-900iB (English, Chinese)

2020

December 25

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC CNC GUIDE / CNC Simulator (English, Chinese)

December 22

• Following products were added in "ROBODRILL" of "ROBOMACHINE" in "Products" menu.
  • FANUC ROBODRILL α-DiB Plus series (Standard version)
  • FANUC ROBODRILL α-DiB_ADV Plus series (Advanced version)

December 21

• Followings were added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.
  • ATI Industrial Automation
  • Gimatic s.r.l

December 9

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL α-DiB5 Plus series (English)
  • FANUC ROBODRILL α-DiB5_ADV Plus series (English)
  • FANUC ROBODRILL DDRiB (English)
  • FANUC ROBODRILL DDR-TiB (English)
  • FANUC ROBOCUT α-CiC series (Chinese)

November 27

• Following Products was added in "New Products" of "Products" menu.
  • SCARA Robot SR-20iA

November 26

• "Vulnerability Information" was added in "Products" menu.

November 19

• "OnRobot" was added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.

November 16

• "Information for JIMTOF2020 Online" was added.
• "Models" was updated in "Robot" of "Products" menu.
  • FANUC Robot SR-20iA was added in "SCARA Robot".
  • FANUC Robot ARC Mate 100iD/16S, FANUC Robot M-10iD/16S, FANUC Robot ARC Mate 120iD/35 and FANUC Robot M-20iD/35 were added in "Arc Welding Robot, Small/Medium Size Robot".
• "FANUC Series 30i/30i/30i-MODEL B Plus" was added in "CNC" of "FA" in "Products" menu.

November 13

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • Robot i series (English, Chinese)
• "Information for IPF Japan 2020 Virtual" was added.
• "ZIMMER Group" was added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.

November 9

• Following product brochures were added in "Product Brochures" in "Products" menu.
  • FANUC Series 30i / 31i / 32i-MODEL B Plus (English, Chinese)

October 29

• Followings were added in "Financial Announcements" in "Investors" menu.
  • Consolidated Quarterly Financial Results For the six months ended September 30, 2020
  • Financial Results for the six months Ended September 30, 2020 (Reference Material)
  • Notice Concerning Revision of Financial Forecasts and so on
  • Notice Concerning Distribution of Dividends of Surplus to Shareholders (for the six months ended September 30, 2020)

October 22

• Followings were added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.
  • Swivellink
  • UniGripper
  • J. Schmalz GmbH
  • SMC
  • ASPINA (Shinano Kenshi Co.,Ltd.)

October 7

• "Fujitsu, FANUC and NTT Communications Establish a Joint Venture to Accelerate Digital Transformation in Manufacturing" was added in "News Release" of "About FANUC" menu.
• "Passing of FANUC's founder and Honorary Chairman, Seiuemon Inaba, Dr. Eng." was added in "News Release" of "About FANUC" menu.

October 2

• Following product brochure was updated in "Product Brochures" in "Products" menu.
  • FANUC Robot CRX-10iA, 10iA/L (Chinese)

September 28

• "Introduction to FANUC" (Japanese/Chinese version) was updated to the edition of September 2020 in FANUC's Corporate Profile Booklet of "Profile" menu.

September 25

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL DDRiB (English)
  • FANUC ROBODRILL DDR-TiB (English)

September 14

• "Introduction to FANUC" (Japanese/English version) was updated to the edition of September 2020 in FANUC's Corporate Profile Booklet of "Profile" menu.

September 8

• Following product brochure was updated in "Product Brochures" in "Products" menu.
  • FANUC Robot CRX-10iA, 10iA/L (English)

September 7

• "LEONI" was added in "Introduction of Compatible Peripheral Devices for Plugin" in "Functions" of "ROBOT" in "Products" menu.

August 24

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC Robot Power Motion i-MODEL A (English, Chinese)
  • FANUC Robot M-410iB, M-410iC (English, Chinese)

August 20

• Following Products were added in "New Products" of "Products" menu.
  • New product FANUC Series 30i/31i/32i-MODEL B Plus
  • New function QSSR
  • FANUC Robot R-2000iD/210FH
  • Support for OPC UA communication in FANUC robots
  • New function "Quick and Simple Start-up of Robotization" of ROBOMACHINE

August 19

• "FANUC News 2020-I (August 2020)" was added in "FANUC News" of "About FANUC" menu.

August 7

• "Introduction of Compatible Peripheral Devices for Plugin" was added in "Functions" of "ROBOT" in "Products" menu.
• Following product brochure was added or updated in "Product Brochures" in "Products" menu.
  • FANUC ROBONANO α-NTiA (Chinese)

July 28

• Followings were added in "Financial Announcements" in "Investors" menu.
  • Consolidated Quarterly Financial Results For the three months ended June 30, 2020
  • Financial Results for the three months Ended June 30, 2020 (Reference Material)
  • Notice Concerning Revision of Financial Forecasts

July 7

• "FANUC CORPORATION 51st Ordinary General Meeting of Shareholders Explanation of Matter of High Interest to Shareholders" was added in "Shareholder's Meeting" of "Investors" menu.

July 6

• FANUC Robot R-2000iD/100FH and FANUC Robot R-2000iC/240F were added in "Large Size Robot" of "Models" in "Robot" of "Products" menu

June 30

• "Introduction of New Collaborative Robot CRX series" was added in "ROBOT" in "Products" menu.

June 26

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC Robot M-800iA/60 (English, Chinese)
  • FANUC Robot P-350iA/45 (English)
  • FANUC ROBONANO α-NTiA (English)
• "Resolutions of the 51st Ordinary General Meeting of Shareholders" was added in "Shareholder's Meeting" of "Investors" menu.

June 25

• "FANUC Robot DR-3iB" was added in "Introduction of Robots for the Food and Beverage Industry" in "ROBOT" in "Products" menu.

May 29

• Followings were added in "Shareholder's Meeting" of "Investors" menu.
  • Notice of Convocation of The 51st Ordinary General Meeting of Shareholders
  • Supplementary Materials to the Notice of Convocation of The 51st Ordinary General Meeting of Shareholders

May 26

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL α-DiB5 series (English)
  • FANUC ROBODRILL α-DiB series (English, Chinese)
  • FANUC ROBODRILL α-DiB5_ADV series (English)
  • FANUC ROBODRILL α-DiB_ADV series (English, Chinese)

April 24

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Consolidated Annual Financial Results For the Year ended March 31, 2020
  • Financial Results for the year Ended March, 2020 (Reference Material)
  • Notice Concerning Distribution of Dividends from Surplus (including Special Dividends) to Shareholders
  • Notice Concerning the Cancellation of Treasury Shares
  • Personnel Matter
  • Notice of the Status and Conclusion of Share Buyback

April 22

• "Sustainability Report" was added in "ESG-Related Information" of "Investors" menu.

April 15

• "Final Determination by the Chinese Government in the Anti‐Dumping Investigation regarding Vertical Machining Centers" was added in "News Release" of "About FANUC" menu.
• "ROBODRILL" of "ROBOMACHINE" in "Products" menu was updated.

April 14

• "Soft Gripper mGrip™" was added in "Functions" of "ROBOT" in "Products" menu.

April 8

• "FANUC ROBODRILL-QSSR" was added in "ROBODRILL" of "ROBOMACHINE" in "Products" menu.

April 7

• Following product brochures (PDF files) were added or updated in "Product Brochures" in "Products" menu.
  • Robot i series (English, Chinese)
  • FANUC Robot CRX-10iA, 10iA/L (English, Chinese)
  • FANUC Robot LR Mate 200iD (English, Chinese)
  • FANUC Robot SR-3iA, 6iA, 12iA (English, Chinese)
  • FANUC Robot DR-3iB (English, Chinese)
  • FANUC Robot R-2000iC (English, Chinese)
  • FANUC Robot R-2000iD (English, Chinese)
  • FANUC Intelligent Robot (English, Chinese)
  • mGrip™ (English, Chinese)
  • FANUC ROBOSHOT α-SiA series (English, Chinese)
• "Models" was updated in "Robot" of "Products" menu.
  • FANUC Robot SR-3iA/H and SR-6iA/H were added in "SCARA Robot".
  • FANUC Robot M-800iA was added in "Arc Welding Robot, Small/Medium Size Robot".

April 3

• "Notice of the Status of Share Buyback" was added in "Financial Announcements" of "Investors" menu.

April 1

• "FANUC News 2019-III (March 2020)" was added in "FANUC News" of "About FANUC" menu.
• Following Products were added in "New Products" of "Products" menu.
  • New product FANUC PANEL iH Pro
  • New product FANUC Series 0i-LF Plus
  • FANUC Robot ARC Mate 120iD
  • FANUC Robot AI path control function
  • FANUC ROBONANO α-NTiA

February 5

• Document Number A-96535 was added in "Standards-related Information" in "Products" menu.

February 4

• Japanese/Chinese version of "Introduction to FANUC" (December 2019) was added in FANUC's Corporate Profile Booklet of "Profile" menu.

January 30

• "Corporate Governance Guidelines" in "Investors" menu was revised.

January 29

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Consolidated Quarterly Financial Results (based on Japanese standards) For the nine months ended December 31, 2019
  • Financial Results for the nine months Ended December 31, 2019 (Reference Material)
  • Notice Regarding Absorption-Type Merger of FANUC Robot Dorf LTD
  • Notice of Extension of Share Buyback Period

2019

December 26

• "FANUC News 2019-II" was added in "FANUC News" of "About FANUC" menu.

December 18

• "ANNUAL REPORT 2019 (Year ended March 31, 2019)" was added in "Annual Reports" of "Investors" menu.
• FANUC Robot CRX-10iA and "Software Interface for CRX-10iA Peripheral Equipment" were added in "Collaborative Robot" of "Models" in "Robot" of "Products" menu.

December 17

• "iREX 2019" in "Products" menu was updated.
• Following product brochures (PDF files) were added or updated in "Product Brochures" in "Products" menu.
  • Robot i series (English, Chinese)
  • FANUC Robot SR-3iA, 6iA, 12iA (English, Chinese)
  • FANUC Robot DR-3iB (English, Chinese)
  • FANUC Robot ARC Mate 100iD / FANUC Robot ARC Mate 120iD (English, Chinese)
  • FANUC Robot M-10iD / FANUC Robot M-20iD (English, Chinese)
  • FANUC ZDT on ROBOT-LINKi (English, Chinese)
  • FANUC ROBONANO α-NMiA (Chinese)
• "Models" was updated in "Robot" of "Products" menu.
  • FANUC Robot SR-12iA was added in "SCARA Robot".
  • FANUC Robot DR-3iB was added in "Delta Robot".
  • FANUC Robot LR Mate 200iD/14L and FANUC Robot ER-4iA were added in "Mini Robot".
  • FANUC Robot ARC Mate 120iD/12L and FANUC Robot M-20iD/12L were added in "Arc Welding Robot, Small/Medium Size Robot".
  • FANUC Robot R-2000iD, FANUC Robot R-2000iC/270R and FANUC Robot M-900iB/330L were added in "Large Size Robot".

December 10

• "iREX 2019" in "Products" menu was updated.

December 3

• "iREX 2019" was added in "Products" menu.

November 27

• "Corporate Governance Guidelines" in "Investors" menu was revised.
• "Code of Conduct" was in "Investors" menu was revised.

November 21

• "FANUC LASER F series" was added in "Laser" in "FA" of "Products" menu.

November 20

• "Introduction to FANUC" was updated to the version of November 2019 in FANUC's Corporate Profile Booklet of "Profile" menu.

November 6

• Following product brochures (PDF files) were updated in "Product Brochures" in "Products" menu.
  • FANUC Robot LR Mate 200iD (English, Chinese)
  • FIELD system (English)

October 28

• Followings were added in "Financial Announcements" in "Investors" menu.
  • Consolidated Quarterly Financial Results (based on Japanese standards) For the six months ended September 30, 2019
  • Financial Results for the six months Ended September 30, 2019 (Reference Material)
  • Notice Concerning Distribution of Dividends of Surplus to Shareholders (for the six months ended September 30, 2019)
  • Notice of Extension of Share Buyback Period

October 24

• "FANUC News 2018-II", "FANUC News 2018-III" and "FANUC News 2019-I" were added in "FANUC News" of "About FANUC" menu.

September 30

• "FANUC's new AI functions that utilize machine learning and deep learning" was added in "News Release" of "About FANUC" menu.

September 27

• Following product brochures (PDF files) were added or updated in "Product Brochures" in "Products" menu.
  • FANUC LASER F series F12000i-MODEL B (English, Chinese)
  • FANUC Robot M-900iB (English, Chinese)
  • FANUC Robot P-40iA (English)
  • FANUC ROBOCUT α-CiB series (English, Chinese)
  • FANUC ROBONANO α-NMiA (English)

September 12

• "FANUC, Fujitsu, NTT Com, Embark on Collaboration to Create 'Digital Utility Cloud' for Machine Tool Industry" was added in "News Release" of "About FANUC" menu.

September 2

• Document Number A-96514 was added in "Standards-related Information" in "Products" menu.

August 22

• Video of Application Example for Labeling was added in "Delta Robot series" and "Introduction of Robots for the Food and Beverage Industry" of "ROBOT" in "Products" menu.

August 9

• "FANUC Series 0i-MODEL F Plus" was added in "CNC" of "FA" in "Products" menu.
• "Latest CNC Series 0i-MODEL F Plus" was added in "News Products" of "Products" menu.
• "ESG DATA BOOK" was added in "ESG-Related Information" of "Investors" menu.

August 7

• Following product brochures (PDF files) were added in "Product Brochures" in "Products" menu.
  • FANUC Robot R-2000iD (English, Chinese)

August 3

• "Investors" was updated as follows;
  • "Code of Conduct" was updated.
  • "Environmental Policy" was updated in "Environment" of "ESG-Related Information".
  • "Human Rights Policy" was added in "Social" of "ESG-Related Information".
  • "CSR Procurement Policy" was added in "Social" of "ESG-Related Information".

August 2

• Following product brochures (PDF files) were updated in "Product Brochures" in "Products" menu.
  • FANUC CNC GUIDE / CNC Simulator (English, Chinese)

July 29

• Followings were added in "Financial Announcements" in "Investors" menu.
  • Consolidated Quarterly Financial Results For the three months ended June 30, 2019
  • Financial Results for the three months Ended June 30, 2019 (Reference Material)
  • Notice of Extension of Share Buyback Period

July 3

• "Notice of the Status of Share Buyback" was added in "Financial Announcements" of "Investors" menu.

June 27

• "Resolutions of the 50th Ordinary General Meeting of Shareholders" was added in "Shareholder's Meeting" of "Investors" menu.
• Corporate Governance Guidelines in "Investors" menu was revised.

June 21

• Following product brochures (PDF files) were updated in "Product Brochures" in "Products" menu.
  • FANUC αi-B series SERVO / βi-B series SERVO (English, Chinese)
  • FANUC Robot R-2000iC (English, Chinese)

June 6

• "Notice of the Status of Share Buyback" was added in "Financial Announcements" of "Investors" menu.

May 30

• "Notice of Convocation of The 50th Ordinary General Meeting of Shareholders" was added in "Shareholder's Meeting" of "Investors" menu.

May 23

• Following product brochures (PDF files) were added in "Product Brochures" in "Products" menu.
  • FANUC ROBODRILL-QSSR / LR Mate 200iD (English)
  • FANUC ROBODRILL-QSSR / CR-7iA (English)

May 15

• Following product brochures (PDF files) were updated in "Product Brochures" in "Products" menu.
  • FANUC DD MOTOR DiS-B series (English, Chinese)
  • FANUC LINEAR MOTOR LiS-B series (English, Chinese)

May 14

• "Construction of New Factory" was added in "News Release" of "About FANUC" menu.
• "FANUC Robot P-1000iA" was added in "Paint Robot" of "ROBOT" in "Products" menu.

April 24

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Consolidated Annual Financial Results For the Year ended March 31, 2019
  • Financial Results for the year Ended March, 2019 (Reference Material)
  • Notice Concerning Distribution of Dividends from Surplus (including Special Dividends) to Shareholders
  • Notice of Share Buyback
  • Notice Concerning the Cancellation of Treasury Shares
• Corporate Governance Guidelines in "Investors" menu was revised.
• "Personnel Matter" was added in "Financial Announcements" of "Investors" menu.

April 11

• Following product brochures was updated in "Product Brochures" in "Products" menu.
  • FANUC Robot CR-4iA, 7iA, 7iA/L / FANUC Robot CR-14iA/L (English, Chinese)
• Following product was added in "Collaborative Robot" of "ROBOT" in "Products" menu.
  • FANUC Robot CR-14iA/L
• Following product were added in "Arc Welding Robot, Small/Medium Size Robot" of "ROBOT" in "Products" menu.
  • FANUC Robot ARC Mate 100iD/8L, M-10iD/8L
  • FANUC Robot ARC Mate 120iD, M-20iD

April 9

• "Construction of New Factory" was added in "News Release" of "About FANUC" menu.

April 8

• Following product brochures (PDF files) were added or updated in "Product Brochures" in "Products" menu.
  • FANUC Robot i series (English, Chinese)
  • FANUC Robot SR-3iA, SR-6iA (English, Chinese)
  • FANUC Robot M-1iA (English)
  • FANUC Robot M-2iA (English)
  • FANUC Robot M-3iA (English)
  • FANUC Robot ARC Mate 100iD / FANUC Robot ARC Mate 120iD (English, Chinese)
  • FANUC Robot M-10iD / FANUC Robot M-20iD (English, Chinese)

April 5

• "FANUC DDRiB / DDR-TiB" was added in "ROBODRILL" of "ROBOMACHINE" in "Products" menu.

April 2

• Following product brochures (PDF files) were added or updated in "Product Brochures" in "Products" menu.
  • FANUC Series 0i-MODEL F Plus (English, Chinese)
  • FANUC Digital Servo Adapter-MODEL B (English, Chinese)
  • FANUC ROBODRILL DDRiB (English)
  • FANUC ROBODRILL DDR-TiB (English)
  • FANUC ROBOSHOT α-SiA series (English, Chinese)
  • FANUC ROBOCUT α-CiB series (English, Chinese)

March 29

• "Personnel Matter" was added in "Financial Announcements" of "Investors" menu.

February 22

• "Product Videos" in "Products" menu was updated.

January 31

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Consolidated Quarterly Financial Results (based on Japanese standards) For the nine months ended December 31, 2018
  • Financial Results for the nine months Ended December 31, 2018 (Reference Material)

January 24

• "FANUC Digital Servo Adapter-MODEL B" was added in "CNC" of "FA" in "Products" menu.

January 15

• "ROBONANO" in "Products" menu was updated to introduce "Ultra Precision Machine ROBONANO α-NMiA"

January 10

• "Introduction of Bin Picking Robot" was updated in "ROBOT" of "Products" menu.

January 7

• "Environmental Report 2018" was added in "Environmental Report" of "Profile" menu.
• Document Number A-96504 was added in "Standards-related Information" in "Products" menu.

2018

December 21

• Corporate Governance Guidelines in "Investors" menu was revised.

December 17

• Following products were added in "Large size Robot" of "ROBOT" in "Products" menu.
  • FANUC Robot R-2000iC/190U
• Following products were added in "Paint Robot" of "ROBOT" in "Products" menu.
  • FANUC Robot P-40iA
  • FANUC Robot P-350iA/45

December 14

• FIELD system Application Introduction was added in "FIELD system" of "Products" menu.

December 4

• "FANUC EMC Center has been certified as Appointed EMC Laboratory by TÜV Reinland Japan" was added in "News Release" of "About FANUC" menu.

November 26

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC Robot i series (English, Chinese)
  • FANUC Robot CR-4iA, 7iA, 7iA/L (English, Chinese)
  • FANUC Robot CR-15iA (English, Chinese)
  • FANUC Robot CR-35iA (English, Chinese)
  • FANUC Robot SR-3iA, SR-6iA (English, Chinese)

October 29

• Followings were added in "Financial Announcements" in "Investors" menu.
  • Consolidated Quarterly Financial Results (based on Japanese standards) For the six months ended September 30, 2018
  • Financial Results for the six months Ended September 30, 2018 (Reference Material)
  • Notice Concerning Distribution of Dividends from Surplus (including Special Dividends) to Shareholders
  • Notice Regarding Absorption-Type Merger of FANUC KIDEN LTD
  • Notice Concerning Return of Substitutional (Past) Portion of Employees’ Pension Fund

October 25

• Followings were added in "ROBOT" of "Products" menu.
  • Introduction of Robots for the Machine Tending Industry
  • Introduction of Robots for the Electrical and Electronic Industry

October 19

• FIELD system was added in "Products" menu.

October 16

• FIELD system was added in "Product Videos" of "Products" menu.

October 15

• "ANNUAL REPORT 2018 (Year ended March 31, 2018)" was added in "Annual Reports" of "Investors" menu.

October 9

• "Introduction to FANUC" was updated to the version of September 2018 in FANUC's Corporate Profile Booklet of "Profile" menu.

October 5

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC Series 0i-MODEL F (English, Chinese)
  • FANUC Series 30i / 31i / 32i / 35i-MODEL B (English, Chinese)
  • FANUC αi-B series SERVO / βi-B series SERVO (English, Chinese)
  • FANUC Intelligent Robot (English, Chinese)
  • FANUC ROBODRILL α-DiB5 series (English)
  • FANUC ROBODRILL α-DiB series (English, Chinese)
  • FANUC ROBODRILL α-DiB5_ADV series (English)
  • FANUC ROBODRILL α-DiB_ADV series (English, Chinese)
  • FANUC ROBOSHOT α-SiA series (English, Chinese)
  • FANUC ROBOCUT α-CiB series (English, Chinese)

October 1

• Special Site for Japan International Machine Tool Fair (JIMTOF2018) was opened.

September 28

• "FANUC News 2018-I" was added in "FANUC News" of "About FANUC" menu.

September 25

• "Introduction of Robots for the Food and Beverage Industry" was added in "ROBOT" of "Products" menu.

August 29

• "Information on IMTS 2018" was added in "Products" menu.

July 25

• Followings were added in "Financial Announcements" in "Investors" menu.
  • Consolidated Quarterly Financial Results For the three months ended June 30, 2018
  • Financial Results for the three months Ended June 30, 2018 (Reference Material)

June 28

• "Resolutions of the 49th Ordinary General Meeting of Shareholders" was added in "Shareholder's Meeting" of "Investors" menu.

June 18

• Following product brochures were added or updated in "Product Brochures" in "Products" menu.
  • FANUC MT-LINKi (English, Chinese)
  • FANUC Robot R-2000iC (English, Chinese)

May 31

• "Notice of Convocation of The 49th Ordinary General Meeting of Shareholders" was added in "Shareholder's Meeting" of "Investors" menu.

May 29

• "FANUC's new AI functions utilizing machine learning and deep learning" was added in "News Release" of "About FANUC" menu.

May 14

• "Factory Expansion and New Factory Construction" was added in "News Release" of "About FANUC" menu.

April 27

• "Financial Results for the year Ended March, 2018 (Reference Material)" was added in "Financial Announcements" of "Investors" menu.

April 26

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Consolidated Annual Financial Results For the Year ended March 31, 2018
  • Notice Concerning Distribution of Dividends of Surplus to Shareholders (for the six months ended March 31, 2018)
  • Notice Concerning the Cancellation of Treasury Shares

April 25

• "ESG-Related Information" was added in "Investors" menu.

April 19

• Following product brochures were updated or added in "Product Brochures" in "Products" menu.
  • Robot i series (English, Chinese)
  • FANUC Robot CR-15iA (English, Chinese)
  • FANUC Robot SR-3iA, SR-6iA (English, Chinese)
  • FANUC Robot M-1iA (English, Chinese)
  • FANUC Robot M-2iA (English, Chinese)
  • FANUC Robot M-3iA (English, Chinese)
  • FANUC Robot ARC Mate 100iC (English)
  • FANUC Robot ARC Mate 100iC / FANUC Robot ARC Mate 120iC (English, Chinese)
  • FANUC Robot M-10iA (English)
  • FANUC Robot M-10iA / FANUC Robot M-20iA (English, Chinese)
  • FANUC Robot M-20iB (English, Chinese)
  • FANUC Robot M-710iC (English, Chinese)
  • FANUC Robot M-2000iA (English, Chinese)
  • FANUC Robot M-410iB (English, Chinese)
  • FANUC Robot M-410iC (English, Chinese)
  • FANUC Robot P-1000iA (English, Chinese)

April 2

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC Series 0i-MODEL F (English, Chinese)

March 30

• Following products were added in "Collaborative Robot" of "ROBOT" in "Products" menu.
  • FANUC Robot CR-15iA

March 20

• "FANUC News 2017-III" was added in "FANUC News" of "About FANUC" menu.

February 26

• Following products were added in "Mini Robot, SCARA Robot, Delta Robot" of "ROBOT" in "Products" menu.
  • FANUC Robot SR-3iA / SR-6iA

February 20

• Following product brochures were updated in "Product Brochures" in "Products" menu.
  • FANUC ROBOCUT α-CiB series (English, Chinese)

February 14

• "Introduction to FANUC" was updated to the version of 2018 (January 2018) in FANUC's Corporate Profile Booklet of "Profile" menu.

February 9

• "Notice Concerning Acquisition of Shares of Life Robotics Inc., (Conversion into a Subsidiary)" was added in "News Release" of "About FANUC" menu.

January 31

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Personnel Matter
  • FANUC, Hitachi, and Preferred Networks to establish a joint venture company for the development of Intelligent Edge Systems

January 30

• Following product brochures were updated or added in "Product Brochures" in "Products" menu.
  • FANUC αi-B series SERVO / βi-B series SERVO (English, Chinese)
  • FIELD system (English)

January 26

• Followings were added in "Financial Announcements" of "Investors" menu.
  • Consolidated Quarterly Financial Results (based on Japanese standards) For the nine months ended December 31, 2017 (PDF file)
  • Financial Results for the nine months Ended December 31, 2017 (Reference Material) (PDF file)

January 9

• "Fire in FANUC MOTOR Manufacturing Subsidiary" was added in "News Release" of "About FANUC" menu.